Your Partner in Weaving Technology



New weaving machines

Person of contact:

Thomas Huber

Tel. +49 2557 928 53 25

info@iq-sps.de



Our current offers

3x SPS150 S460 N2 EP D12 R

Reconstructed in year 2023

CE-Certification 2023

Machine performance: max. 290 rpm or max. 1300 m/min weft insertion

On full size max. 280 rpm (mechanical performance data without fabric)

Maximum weft insertion rate was calculated for smooth yarns

≥ 13.5 Nm

With unevenly thick yarns, as well as yarns heavier than this
limit value, a reduction in performance is to be expected.

 

MACHINE SPECIFICATIONS:

  • Electronically controlled weft brakes enables yarn-friendly setting of the braking cycle
  • Perfect control of the weft insertion by longitudinally arranged drawback levers
  • Lubrication of the projectile circuit by automatic lubrication timing (GS system)
  • Opto-electronic protection (light barrier) for the safety of the operators
  • polypropylene fabric
  • 2 colours
  • Equipped to weave heavy fabrics R
  • Equipped with 6 frame drives
  • Shedding motion EP10 with reinforced deflecting levers
  • 6 cams 1/1 + 1/1 / 4 spacer rings
  • automatic levelling of shafts
  • Automatic pick-finding device
  • Weft insertion by projectile D12
  • Projectile weight 36 gram
  • 23 Projectile 4000g, knurled left/right 0.19mm
  • Weft feeder bar steel
  • Feeder grippers clamping surface knurled/knurled 0.19 mm
  • Provided for single pick insertion
  • Projectile brake normal
  • Weft tensioner cam 25°
  • Weft brake, with motor finger brake
  • Weft cutter
  • Guide teeth single
  • Weaving machine provided for full warp beam
  • prepared for warp beam flange diameter 1016mm
  • Warp beam bearing stationary
  • prepared for  warp beam tube diameter 150mm
  • square bar 50 x 50 for warp treads
  • let off motion: motor
  • Whip roller
  • Deflecting roller
  • Warp stop motion standard, 26 pitch, with 2 sector monitoring
  • Warp stop motion with 4 contact rails
  • Heald frame guide center, for heald frames Grob and Standard
  • Provided for 1-width weaving
  • With telescopic shaft
  • Standard tucker SU and FA
  • Tucking needle for PP, R=1mm
  • Weft end gripper flat 4mm, spring effect hard
  • Temple with pressure from top
  • Equipped with temples parallel, normal pins 1.00 mm
  • Mechanical cloth take-up
  • Weft density range, coarse 4:60 or 8:55
  • Wheels to regulate the weft density 3 per cm to 10 per cm
  • Reinforced breast beam for cloth expander bar
  • Take-up roller diameter 160 / pressure roller diameter 133mm
  • Cloth take-up roller coated with Emery corundum 60
  • With pressure roller surface felt cloth
  • 1 cloth support
  • With fabric spreader bar above
  • lubrification GS-system
  • Mains Voltage 400V
  • Equipped for mains frequency 50 Hz
  • With 5.0/5.5 kW motor
  • Motor with 6 poles
  • With user identification
  • Language documentation for machines English
  • 1 technical documentation with spare parts catalogue sent along with machine (digital), English/German)

ACCESSOIRES:

  • 6 harness frames steel/steel  - new
  • 1 batch winder incl. walking bridge - new
  • 1 set warp beam 1016mm Q4 150/1016mm - new
  • 2 accumulators IRO X2 incl. spool truck - new

Price per machine: on request

EXW Wettringen, Germany (Incoterms 2020)



Download
SPS150 P540 N2 EP D12 R Englisch.pdf
Adobe Acrobat Document 196.9 KB

SPS150 P540 N2 EP D12 R

The following specifications and pictures are only examples. The actual specifications have to be adapted to your fabrics.

  • 2 colours
  • 6 harness drives
  • excentric device EP 10 with 6 cams
  • shed formation EP
  • 2 machines with whip roller / deflecting roller
  • 1 machine with warp tensioner device
  • let off device electric
  • take up drive mechanic
  • 3 contact bars
  • 4 harness frames
  • guide teeth block or single on customer's demand
  • 2 accumulators
  • 1 spool truck
  • automatic pick finding device
  • automatic shed formation device
  • projectile brake
  • lubrication GS compact
  • weft brake electronic, type on customer's demand
  • take-up roller mechanic
  • take-up roller D=160 mm
  • pressure roller D=133 mm
  • prepared for half warp beam with differential
  • prepared for warp beam D=150/1016 mm
  • 2 warp beam gear wheels
  • 2 bearing rings
  • 2 clamping flanges
  • 1 intermediate warp beam bearing
  • 26 projectiles, type on customer's demand
  • no cloth roller
  • optional: batch winder
  • SU/FA side tucking unit
  • speed: 265 rpm max; 240 rpm on full size
  • weft insertion 1300 m/min
  • CE certification complying with the latest standards

Price: on request and depending on customers' specification.

EXW Wettringen, Germany



Possible applications

  • Geotech
  • Agrotech
  • Oekotech
  • Indutech


IQ-SPS GmbH

Keplerweg 15

48493 Wettringen / Germany

 info@iq-sps.de

Press releases

We are a member of

Verband Deutscher Maschinen- und Anlagenbau