Experts in Weaving Technology

Person of contact:

Thomas Huber

Tel. +49 2557 928 53 25

info@iq-sps.de

Reconstructed in year 2023

CE-Certification 2023

Machine performance: max. 290 rpm or max. 1300 m/min weft insertion

On full size max. 280 rpm (mechanical performance data without fabric)

Maximum weft insertion rate was calculated for smooth yarns

≥ 13.5 Nm

With unevenly thick yarns, as well as yarns heavier than this
limit value, a reduction in performance is to be expected.

MACHINE SPECIFICATIONS:

• Electronically controlled weft brakes enables yarn-friendly setting of the braking cycle
• Perfect control of the weft insertion by longitudinally arranged drawback levers
• Lubrication of the projectile circuit by automatic lubrication timing (GS system)
• Opto-electronic protection (light barrier) for the safety of the operators
• polypropylene fabric
• 2 colours
• Equipped to weave heavy fabrics R
• Equipped with 6 frame drives
• Shedding motion EP10 with reinforced deflecting levers
• 6 cams 1/1 + 1/1 / 4 spacer rings
• automatic levelling of shafts
• Automatic pick-finding device
• Weft insertion by projectile D12
• Projectile weight 36 gram
• 23 Projectile 4000g, knurled left/right 0.19mm
• Weft feeder bar steel
• Feeder grippers clamping surface knurled/knurled 0.19 mm
• Provided for single pick insertion
• Projectile brake normal
• Weft tensioner cam 25°
• Weft brake, with motor finger brake
• Weft cutter
• Guide teeth single
• Weaving machine provided for full warp beam
• prepared for warp beam flange diameter 1016mm
• Warp beam bearing stationary
• prepared for  warp beam tube diameter 150mm
• square bar 50 x 50 for warp treads
• let off motion: motor
• Whip roller
• Deflecting roller
• Warp stop motion standard, 26 pitch, with 2 sector monitoring
• Warp stop motion with 4 contact rails
• Heald frame guide center, for heald frames Grob and Standard
• Provided for 1-width weaving
• With telescopic shaft
• Standard tucker SU and FA
• Tucking needle for PP, R=1mm
• Weft end gripper flat 4mm, spring effect hard
• Temple with pressure from top
• Equipped with temples parallel, normal pins 1.00 mm
• Mechanical cloth take-up
• Weft density range, coarse 4:60 or 8:55
• Wheels to regulate the weft density 3 per cm to 10 per cm
• Reinforced breast beam for cloth expander bar
• Take-up roller diameter 160 / pressure roller diameter 133mm
• Cloth take-up roller coated with Emery corundum 60
• With pressure roller surface felt cloth
• 1 cloth support
• With fabric spreader bar above
• lubrification GS-system
• Mains Voltage 400V
• Equipped for mains frequency 50 Hz
• With 5.0/5.5 kW motor
• Motor with 6 poles
• With user identification
• Language documentation for machines English
• 1 technical documentation with spare parts catalogue sent along with machine (digital), English/German)

ACCESSOIRES:

• 6 harness frames steel/steel  - new
• 1 batch winder incl. walking bridge - new
• 1 set warp beam 1016mm Q4 150/1016mm - new
• 2 accumulators IRO X2 incl. spool truck - new

Price per machine: on request

EXW Wettringen, Germany (Incoterms 2020)

The following specifications and pictures are only examples. The actual specifications have to be adapted to your fabrics.

• 2 colours
• 6 harness drives
• excentric device EP 10 with 6 cams
• shed formation EP
• 2 machines with whip roller / deflecting roller
• 1 machine with warp tensioner device
• let off device electric
• take up drive mechanic
• 3 contact bars
• 4 harness frames
• guide teeth block or single on customer's demand
• 2 accumulators
• 1 spool truck
• automatic pick finding device
• automatic shed formation device
• projectile brake
• lubrication GS compact
• weft brake electronic, type on customer's demand
• take-up roller mechanic
• take-up roller D=160 mm
• pressure roller D=133 mm
• prepared for half warp beam with differential
• prepared for warp beam D=150/1016 mm
• 2 warp beam gear wheels
• 2 bearing rings
• 2 clamping flanges
• 1 intermediate warp beam bearing
• 26 projectiles, type on customer's demand
• no cloth roller
• optional: batch winder
• SU/FA side tucking unit
• speed: 265 rpm max; 240 rpm on full size
• weft insertion 1300 m/min
• CE certification complying with the latest standards

Price: on request and depending on customers' specification.

EXW Wettringen, Germany

• Geotech
• Agrotech
• Oekotech
• Indutech